=== 10 2239 Operable Partitions R1 - SD.pdf ===
--- Page 1 ---
Submittal Cover Sheet 
* Submials not submied as outlined below will not be reviewed but marked as revise and resubmit. Submials must be submied with this 
cover sheet, per spec, and with types/models outlined in red. Submials are to be divided as separate ﬁles or as a single ﬁle with each submial 
type and spec secon having its own corresponding cover sheet. Submials for each spec secon to be separated and idenﬁed as Product 
Data/Other Info, Licenses, Shop Drawings, and Samples.  
Project: 
__________________________________ 
Company: 
__________________________________ 
Date:   
__________________________________ 
Submial/Spec Title:  
__________________________________________________________________ 
Submial Revision #:  
__________________________________________________________________ 
Spec Secon # (00 0000.00): __________________________________________________________________ 
Subcontractor Comments:  __________________________________________________________________ 
__________________________________________________________________________________________ 
 
 
 
 
 
 
Contractor
Comments
Architect
Comments
Engineer
Comments
Contractor
Stamp
Architect
Stamp
Engineer
Stamp
Submittal Review
This submittal has been reviewed for general compliance with the
construction documents. The submittal review process does not
relieve the subcontractor of the responsibility to verify and provide
the correct: quantities, dimensions, details, layouts, and incidentals
per the construction documents and onsite project conditions.
Reviewed By: Zac Hansen   Date: 11/6/2024
        REVIEWED
        REVIEWED AS NOTED
        REVISE & RESUBMIT
        REJECTED
11/07/2024
Jeff Thomas
505 Architects LLC
X
SHS
The Best Companies
11/6/2024
Operable Partitions R1 - SD
1
10 2239


--- Page 2 ---
ELA Classrooms 
2183/2195
REVISED
REVISED
9:10 AM, November 6, 2024
9:10 AM, November 6, 2024
4'-0" PKT BEING
PROVIDED. RE:
A145 PR#05
5'-7 1/4"
PROVIDE SMOKE GREY
FOR TRIM AND HINGE


--- Page 3 ---


--- Page 4 ---


--- Page 5 ---
10'-0" FINISHED
CEILING HEIGHT


--- Page 6 ---


--- Page 7 ---
10'-0" FINISHED
CEILING HEIGHT
5'-7 1/4"


--- Page 8 ---
ELA Classrooms 
2197/2199
REVISED
REVISED
9:10 AM, November 6, 2024
9:10 AM, November 6, 2024
4'-0" PKT BEING
PROVIDED. RE:
A145 PR#05
5'-7 1/4"
PROVIDE SMOKE GREY
FOR TRIM AND HINGE


--- Page 9 ---


--- Page 10 ---


--- Page 11 ---
10'-0" FINISHED
CEILING HEIGHT


--- Page 12 ---


--- Page 13 ---
10'-0" FINISHED
CEILING HEIGHT
5'-7 1/4"


--- Page 14 ---
S
h
e
r
w
i
n
 
W
il
li
a
m
s
 
W
h
it
e
S
h
e
r
w
i
n
 
W
il
l
i
a
m
s
 
S
m
o
k
e
 
G
r
a
y
S
h
e
r
w
i
n
 
W
il
l
i
a
m
s
 
N
a
t
u
r
a
l
 
C
h
o
i
c
e
S
h
e
r
w
i
n
 
W
i
l
li
a
m
s
 
D
a
r
k
 
B
r
o
n
z
e
S
h
e
r
w
i
n
 
W
i
l
li
a
m
s
 
B
l
a
c
k
TRIM COLOR OPTIONS
Smoke Gray, Natural Choice, Dark Bronze, or Black
Selection impacts sweeps, seals, pull handles, 
eraser trays, hinges, and worksurface trim.
Selection will be uniform throughout the wall.
HINGE COLOR OPTIONS
White, Smoke Gray, Natural Choice, Dark Bronze, or Black
Selection will be uniform throughout the wall.
Form No. 2240 5/23
800-869-9685
TRIM & HINGE
COLOR SELECTOR
info@modernfold.com
modernfold.com
PROVIDE SMOKE GREY
FOR TRIM AND HINGE


--- Page 15 ---
Adrift
512 (S)     548 (H)
Oats
518 (S)     554 (H)
Bobbin Weave
524 (S)     560 (H)
Reed
513 (S)     549 (H)
Prairie
519 (S)     555 (H)
Threads
525 (S)     561 (H)
Sandalwood
514 (S)     550 (H)
Reed
520 (S)     556 (H)
Common Thread
526 (S)     562 (H)
Slate
516 (S)     552 (H)
Feather Grass
522 (S)     558 (H)
Lustre
528 (S)     564 (H)
Lotus
511 (S)     547 (H)
Pumila Grass
517 (S)     553 (H)
Canvas
523 (S)     559 (H)
Veranda
515 (S)     551 (H)
Red Oat
521 (S)     557 (H)
Quill
527 (S)     563 (H)
White
529 (S)     565 (H)
Arctic
535 (S)     571 (H)
B. White
541 (S)     577 (H)
Silver Dust
530 (S)     566 (H)
Serenity
536 (S)     572 (H)
Eggshell
542 (S)     578 (H)
Cirrus
531 (S)     567 (H)
Grey Pearl
537 (S)     573 (H)
Frost Taupe
543 (S)     579 (H)
Camel Down
532 (S)     568 (H)
Willet
538 (S)     574 (H)
Aspen
544 (S)     580 (H)
Cimmerin
533 (S)     569 (H)
Windrift
539 (S)     575 (H)
Denver
545 (S)     581 (H)
Carbon
534 (S)     570 (H)
Hemp
540 (S)     576 (H)
Black
546 (S)     582 (H)
Standard Len-Tex® Vinyl Offering
Standard Len-Tex® Vinyl Offering
Displayed samples feature a standard weight 20-oz. (S). Also available in a heavy-duty 30-oz. construction (H).
Note:  Each digital swatch is a digital color presentation of a standard color and is subject to minor shade variations.
Lennon Grass
Arani Silk
Loominous
Soraya
Coronado
Emboss LT Suede


--- Page 16 ---
VINYL SELECTOR
Len-Tex® Vinyl Wallcovering Finish Speciﬁ cations
Form:  2243   1/22
800-869-9685  |  info@modernfold.com  |  www.modernfold.com
215 West New Rd. |  Greenﬁ eld, IN 46140
Federal Speciﬁ cations:  
Len-Tex Clean Vinyl Wallcovering meets or exceeds all requirements of W-101 (20 oz), W-101, Type III (30 oz.) Quality 
Standard for Polymer Coated Fabric Wallcovering and EN 15102, European Standard for Decorative Wallcoverings. This 
product has been accepted for use by the City of New York Dept. of Buildings under MEA-381-93M.  
Fire Hazard Classiﬁ cation Results:  
ASTM E-84 Tunnel Test: Class A, Flame Spread: 15; Smoke Developed: 10  (20 oz.)
ASTM E-84 Tunnel Test: Class A, Flame Spread: 20; Smoke Developed: 65  (30 oz.)
PASS rating as tested under NFPA 286 (Corner burn test)  
CAN/ ULC S102-10 Fire Test: Class A, Flame Spread: 15; Smoke Developed: 75 
EN 13501-1 Fire Classiﬁ cation: B-s2, d0  
Performance Features: 
Len-Tex Wallcoverings use Clean Vinyl Technology™
Phthalate-free 
Alumina trihydrate ﬁ re retardant (antimony-free)  
Ultra-Fresh® antimicrobial (non-arsenate)  
No heavy metals or formaldehyde  
Printed exclusively with water-based, low VOC AQUA-CLEAR™ inks  
Roller applied AQUA-CLEAR 3.0™ top ﬁ nish for improved stain resistance  
Microventing for permeability is available on a custom order basis  
Advanced Warning Eff ect (ionization-type smoke detector)  
Five year warranty against materials defects – Consult your distributor for details 
Environmental Attributes:  
Ultra-low emitting – Pass rating under CA 01350  
Listed by ZeroDocs and Sustainable Minds® for California CHPS (Collaborative for High Performance Schools) SCS Indoor 
Advantage™ Gold certiﬁ ed  
CA Prop 65 compliant  
Published Health Product Declaration (HPD) – LEED eligible  
Published Len-Tex Environmental Product Declaration (EPD) – LEED eligible  
GreenCircle Certiﬁ ed™  
Find Len-Tex products listed on:  
Ecomedes (ecomedes.com), SCS Global Services website (scsglobalservices.com), GreenCircle Certiﬁ ed website 
(greencirclecertiﬁ ed.com), Mortarr (mortarr.com)  
Permeability, Moisture and Mold:  
Vinyl wallcovering can act as a vapor barrier and consequently should NOT be installed on walls that are susceptible 
to excessive condensation or moisture inﬁ ltration.  To reduce the risk of fungal growth, Len-Tex recommends that 
all wallcovering(s) be microvented when installed in Humid and Fringe Zone 1 climates.(ref: ASHRAE Handbook of 
Fundamentals, Chapter 21, Figure 16). Please see full details on microventing at our website, lentexwallcoverings.com. 
LEN-TEX®
   
 
U.S. Units  
    Metric Units
Total Weight: 
20.0 oz./LY            612 G/LM
                            13.2 oz./SY 
    442 G/SM
Fabric Weight::  2.5 oz./LY  
    85 G/LM
Vinyl Weight:  17.5 oz./LY  
    520 G/LM
Material Width: 53/54”                    134/137 cm
Fabric Type:   
Poly Cotton Osnaburg
   
 
U.S. Units  
    Metric Units
Total Weight: 
30.0 oz./LY            925 G/LM
                            20.0 oz./SY 
    680 G/SM
Fabric Weight::  5.5 oz./LY  
    170 G/LM
Vinyl Weight:  24.5 oz./LY  
    756 G/LM
Material Width: 53/54”                    134/137 cm
Fabric Type:   
Poly Cotton Drill


=== 10 2239 Operable Partitions R1 - SD_1.pdf ===
--- Page 1 ---
Submittal Cover Sheet 
* Submials not submied as outlined below will not be reviewed but marked as revise and resubmit. Submials must be submied with this 
cover sheet, per spec, and with types/models outlined in red. Submials are to be divided as separate ﬁles or as a single ﬁle with each submial 
type and spec secon having its own corresponding cover sheet. Submials for each spec secon to be separated and idenﬁed as Product 
Data/Other Info, Licenses, Shop Drawings, and Samples.  
Project: 
__________________________________ 
Company: 
__________________________________ 
Date:   
__________________________________ 
Submial/Spec Title:  
__________________________________________________________________ 
Submial Revision #:  
__________________________________________________________________ 
Spec Secon # (00 0000.00): __________________________________________________________________ 
Subcontractor Comments:  __________________________________________________________________ 
__________________________________________________________________________________________ 
 
 
 
 
 
 
Contractor
Comments
Architect
Comments
Engineer
Comments
Contractor
Stamp
Architect
Stamp
Engineer
Stamp
Submittal Review
This submittal has been reviewed for general compliance with the
construction documents. The submittal review process does not
relieve the subcontractor of the responsibility to verify and provide
the correct: quantities, dimensions, details, layouts, and incidentals
per the construction documents and onsite project conditions.
Reviewed By: Zac Hansen   Date: 11/6/2024
        REVIEWED
        REVIEWED AS NOTED
        REVISE & RESUBMIT
        REJECTED
SHS
The Best Companies
11/6/2024
Operable Partitions R1 - SD
1
10 2239


--- Page 2 ---
ELA Classrooms 
2183/2195
REVISED
REVISED
9:10 AM, November 6, 2024
9:10 AM, November 6, 2024


--- Page 3 ---


--- Page 4 ---


--- Page 5 ---


--- Page 6 ---


--- Page 7 ---


--- Page 8 ---
ELA Classrooms 
2197/2199
REVISED
REVISED
9:10 AM, November 6, 2024
9:10 AM, November 6, 2024


--- Page 9 ---


--- Page 10 ---


--- Page 11 ---


--- Page 12 ---


--- Page 13 ---


